AH-118 Broadband Double Ridged Waveguide Horn Antenna for EMC – at BRL Test

Posted: March 27, 2015 in Test Equipment
Tags: , , , , , , , ,
AH118 Compower

BRL Test is your EMC EMI Headquarters. Click for Com-Power AH-118 pricing now.

Com-Power AH-118

Click here for datasheet and quoteform at BRLTest.com  Call BRL Test today at 407-682-4228

The Horn antenna Model AH-118 is a standard broadband double ridged waveguide horn antenna. This antenna is linearly polorized and is designed specifi cally for EMC measurements for the 1-18 GHz frequency range. The AH-118 Horn antenna can be used for emissions and immunity testing. The gain of this Horn antenna is at least 6.1 dBi over the entire frequency range. Model AH-118 can accept up to 300 Watts input power in continuous mode. This antenna is constructed using light weight aluminum with a corrosion resistant conductive coating. The mounting base of Model AH-118 has 1/4 inch x 20 threads. This allows the antenna to be mounted on a tripod (Model AT-100) or a tripod with matching threads. Each antenna is individually calibrated at 3 meters. The calibration data and certifi cate will be shipped with each antenna.

This antenna is suitable for ANSI 63.4, CISPR16, EN 55022, FAA and other EMC standards that require emissions and immunity testing. The high gain reduces input power requirements to generate high electromagnetic field levels for immunity testing. High gain also increases antenna sensitivity to low level signals. During emissions measurement, the fi eld strength (dBV/m) is calculated by adding the antenna factor (dB/m) to the voltage measured (dBV) at the antenna terminals. For immunity testing, the input power requirement P in Watts to generate E Electric Field Strength in V/m at a distance in D meters can be calculated by using the following formula: P = E2 x D2 / 30 x Numeric Gain G = 20 log F -29.79- AF G = 10 log (Numeric Gain) Where G= gain in dBi F = Frequency in MHz AF = antenna factor in dB

Frequency Range: 1 GHz – 18 GHz Input Power: 300 Watts continious VSWR: 2.0 : 1 Polorization: Linear Impedance: 50 Ω Connector type: N Female Weight: 4 lb. max. Size: 7.8″ X 9.5″ X 5.6″ max.

BRL Test is your EMC EMI headquarters.  Click here to shop now.

EMC EMI
   Absorbing Clamps for EMI EMC
   Antenna Kits
   Antennas for EMC EMI
   CDN Calibration Accrs
   Comb Generators
   Conducted Immunity System CIS
   Directional Couplers (DCD, DCU)
   EMI Test Receivers
   Line Impedance Stblzr
   Transient Limiters for LISN
   Near Field Probes
   Power Amplifiers for EMC EMI
   CDN Coupling Decoupling Networks
   Preamplifiers for EMC EMI
   Telecom (Part68 CS03)
   Antenna Masts
   Turntables for EMC EMI

Advertisements

Leave a Comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s