Posts Tagged ‘HP 8903B’

BRL Test – We Absolutely Know Analyzers.  Click here for 8903B quote form and data sheet at BRLTest.com.

BRL Test has Agilent / HP 8903B Audio Analyzer Sale Priced at $999

BRL Test has Agilent / HP 8903B Audio Analyzer Sale Priced at $999

BRL-TESTAgilent 8903B Audio Analyzer
The Keysight/ Agilent/ HP 8903B audio analyzer. Ideally suited for audio measurements from 20 Hz to 100 kHz. The 8903B is an easy to use low-distortion audio source , high-performance distortion analyzer, frequency counter, ac voltmeter, dc voltmeter, and SINAD meter. With microprocessor control of source and analyzer, the 8903B can perform stimulus-response measurements (such as signal-to-spec sheet data sheetnoise ratio and swept distortion) automatically with no additional equipment. For ease of use, most measurements on the 8903B are made with only one or two keystrokes. The 8903B automatically tunes and auto ranges for maximum accuracy and resolution. For quick identification of input signals, the analyzer counts and displays the input frequency in all ac measurement modes.

Signal-to-Noise

Frequency Range: 50 Hz to 100 kHz

Display Range: 0 to 99.99 dB Accuracy: ±1 dB

Input Voltage Range: 50 mV to 300 V

Residual Noise (the higher of): 80 kHz BW: −85 dB or 17 µV 500 kHz BW: −70 dB or 50 µV

Supplemental Characteristics

Time to Return First Measurement: <2.5 second

Measurement Rate: One reading per second

Frequency

Range: 20 Hz to 100 kHz

Resolution: 0.3%

Accuracy: 0.3% of setting

Output Level

Range: 0.6 mV to 6 V open circuit

Resolution: 0.3% or better

Accuracy: 2% of setting 60 mV to 6 V, 20 Hz to 50 kHz. 3% of setting 6 mV to 6 V, 20 Hz to 100 kHz. 5% of setting 0.6 mV to 6 mV, 20 kHz to 100 kHz.

Flatness (1 kHz reference): ±0.7% (±0.06 dB), 20 Hz to 20 kHz. ±2.5% (±0.22 dB), 20 Hz to 100 kHz.

Distortion and Noise (the higher of): 80 kHz BW: −80 dB or 15 µV, 20 Hz to 20 kHz. 500 kHz BW: −70 dB or 38 µV, 20 Hz to 50 kHz. −65 dB or 38 µV, 50 kHz to 100 kHz.

Impedance: 600 Ω ±1% or 50 Ω ±2% front panel or HP-IB programmable (47 special function).

Frequency Switching Speed: ❤ ms (does not include HP-IB programming time)

Output Level Switching Speed: 20 ms (does not include HP-IB programming time)

Sweep Mode: Log sweep with up to 500 points per decade or 255 points total between entered start and stop frequencies.

Call your BRL Test representative today to lock in on this limited time pricing and availability 407-682-4228

Advertisements