Posts Tagged ‘sale’

BRL Test – We Absolutely Know Analyzers.  Click here for 8903B quote form and data sheet at

BRL Test has Agilent / HP 8903B Audio Analyzer Sale Priced at $999

BRL Test has Agilent / HP 8903B Audio Analyzer Sale Priced at $999

BRL-TESTAgilent 8903B Audio Analyzer
The Keysight/ Agilent/ HP 8903B audio analyzer. Ideally suited for audio measurements from 20 Hz to 100 kHz. The 8903B is an easy to use low-distortion audio source , high-performance distortion analyzer, frequency counter, ac voltmeter, dc voltmeter, and SINAD meter. With microprocessor control of source and analyzer, the 8903B can perform stimulus-response measurements (such as signal-to-spec sheet data sheetnoise ratio and swept distortion) automatically with no additional equipment. For ease of use, most measurements on the 8903B are made with only one or two keystrokes. The 8903B automatically tunes and auto ranges for maximum accuracy and resolution. For quick identification of input signals, the analyzer counts and displays the input frequency in all ac measurement modes.


Frequency Range: 50 Hz to 100 kHz

Display Range: 0 to 99.99 dB Accuracy: ±1 dB

Input Voltage Range: 50 mV to 300 V

Residual Noise (the higher of): 80 kHz BW: −85 dB or 17 µV 500 kHz BW: −70 dB or 50 µV

Supplemental Characteristics

Time to Return First Measurement: <2.5 second

Measurement Rate: One reading per second


Range: 20 Hz to 100 kHz

Resolution: 0.3%

Accuracy: 0.3% of setting

Output Level

Range: 0.6 mV to 6 V open circuit

Resolution: 0.3% or better

Accuracy: 2% of setting 60 mV to 6 V, 20 Hz to 50 kHz. 3% of setting 6 mV to 6 V, 20 Hz to 100 kHz. 5% of setting 0.6 mV to 6 mV, 20 kHz to 100 kHz.

Flatness (1 kHz reference): ±0.7% (±0.06 dB), 20 Hz to 20 kHz. ±2.5% (±0.22 dB), 20 Hz to 100 kHz.

Distortion and Noise (the higher of): 80 kHz BW: −80 dB or 15 µV, 20 Hz to 20 kHz. 500 kHz BW: −70 dB or 38 µV, 20 Hz to 50 kHz. −65 dB or 38 µV, 50 kHz to 100 kHz.

Impedance: 600 Ω ±1% or 50 Ω ±2% front panel or HP-IB programmable (47 special function).

Frequency Switching Speed: ❤ ms (does not include HP-IB programming time)

Output Level Switching Speed: 20 ms (does not include HP-IB programming time)

Sweep Mode: Log sweep with up to 500 points per decade or 255 points total between entered start and stop frequencies.

Call your BRL Test representative today to lock in on this limited time pricing and availability 407-682-4228

Photo Tektronix MSO4054 at BRL Test

Tektronix MSO4054 Oscilloscope, 500 MHz, 4+16 CH, 5GS/s. Can Anyone beat BRL Test’s Price at $5,490?  If so send us your quote so we can beat it.

At BRL Test we’ve been busy buying up oscilloscopes.  This means you can save big on premium used, warrantied and certified oscilloscopes.  Take the MSO4054.  Can anyone beat BRL Test’s price?  If so send us your quote so we can beat it.

Get a great deal today and rest easy with your purchase knowing that you have the full backing of BRL Test’s world class repair department.

Get in for less money and lower your downtime risk with BRL Test.

Call 407-862-4228 or get a MSO4054 online quote when you click here.

As an embedded design engineer, you are faced with the challenge of ever increasing system complexity. A typical embedded design may incorporate various analog signals, high- and lowspeed serial digital communication and microprocessor buses, just to name a few. Serial protocols such as I2C and SPI are used frequently for chip-to-chip communication, but parallel buses are still used in many applications. Microprocessors, FPGAs, Analog-to-Digital Converters (ADCs) and Digital-to-Analog Converters (DACs) are all examples of ICs that present unique measurement challenges in today’s embedded designs. The MSO4000 Series Mixed Signal Oscilloscopes offer the addition of 16 digital channels. These channels are tightly integrated into the oscilloscope’s user interface, simplifying operation and making it possible to solve mixed signal issues more easily. Next Generation Digital Waveform Display In a continued effort to make mixed signal oscilloscopes easy to use, the MSO4000 Series has redefined the way you view digital waveforms. One common problem shared by both logic analyzers and mixed signal oscilloscopes is determining if data is a one or a zero when zoomed in far enough that the digital trace stays flat all the way across the display. The MSO4000 has color-coded the digital traces, displaying ones in green and zeros in blue. The MSO4000 has multiple transition detection hardware. When the system detects multiple transitions, the user will see a white edge on the display. White edges indicate that more information is available by zooming in or acquiring at faster sampling rates. In most cases zooming in will reveal the pulse that was not viewable at the previous settings. If the white edge is still present after zooming in as far as possible, this indicates that increasing your sample rate on the next acquisition will reveal higher frequency information than your previous settings could acquire. Channel setup on an MSO can often be time-consuming as compared to the traditional oscilloscope. This process often includes probing the device-under-test, labeling the channels and positioning the channels on screen. The MSO4000 simplifies this process by allowing the user to group digital waveforms. By simply placing digital waveforms next to each other, they form a group. Once a group is formed, you can position all the channels contained in that group together. This greatly reduces the normal setup time associated with positioning channels individually

R&S RTM1054 photo

R&S RTM1054 Boots up fast and get’s it all done! On Sale at BRL Test for $3,500

BRL Test is your headquarters for premium used oscilloscopes.  Warrantied, certified and fully backed by BRL Test’s world class repair lab.  Great equipment for realistic budgets without the worry.  

Click here for RTM1054 data sheet and quote forms at

Click here to shop and compare like 500MHz 4CH oscilloscopes by Agilent, Lecroy, Tektronix, R&S and Yokogawa.

Rohde & Schwarz RTM1054

As a true scope of the art, the RTM meets the increased demands on bench oscilloscopes for the development, production and servicing of embedded hardware, providing time, frequency, protocol and logic analysis, plus a digital voltmeter in a single beautiful box:

❙ Time analysis: high sensitivity of 1 mV/div to detect signals that would otherwise be lost in the noise

❙ Frequency analysis: reliable fault detection with integrated FFT and spectrum analysis with spectrogram option

❙ Logic analysis: 20 Msample with 5 Gsample/s for detailed analysis of digital signals

❙ Protocol analysis: simple triggering and decoding of serial buses

❙ Digital voltmeter/frequency counter: key signal parameters at a glance

Anritsu S332D

With the S332D offered by BRL Test you are on the site and in control. Move with freedom, see with clarity and act with certainty. Fix the fault and be the hero of the site.

Do you have what it takes to master the site?  With the S332D offered by BRL Test you are on the site and in control.  Move with freedom, see with clarity and act with certainty.  Fix the fault and be the hero of the site.  Be the budget hero when you buy premium used, certified and warrantied from BRL Test.  Fully backed by BRL Test’s world class repair department.

On sale while it lasts!  Click here for datasheets and quote form.  Call 407-682-4228 Today

BRL Test...We Absolutely Know SiteMasters.


Tektronix DSA72504D. Be sure with excellent signal integrity. Click here for datasheet and quoteform.

Tektronix DSA72504D

Save on premium used and certified high end oscilloscopes at BRL Test

The superior signal integrity and excellent signal-to-noise ratio of the DPO/DSA/MSO70000 Series ensures confidence in your measurement results. High bandwidth, up to 33 GHz, matched across 4 channels Bandwidth enhancement eliminates imperfections in frequency response all the way to the probe tip. User-selectable filters for each channel provides magnitude and phase correction for more accurate representation of extremely fast signals. In addition, only Tektronix allows the user to disable the bandwidth enhancement for applications needing the highest measurement throughput Simultaneous high sample rate on all channels captures more signal details (transients, imperfections, fast edges) 100 GS/s on 2 channels and 50 GS/s on all analog channels for the 12.5 through 33 GHz models 25 GS/s on all analog channels for the 4, 6, and 8 GHz models 12.5 GS/s on all logic channels in the MSO70000 Series Lowest jitter noise floor and highest vertical accuracy provide additional margin in your measurements Long record length provides high resolution and extended-duration waveform capture Standard 10 MS per channel on the DPO70000 and MSO70000 Series and 31 MS on the DSA70000 Series Optional up to 125 MS on all four channels for the 4, 6, and 8 GHz models Optional up to 250 MS on all four channels for the 12.5 through 33 GHz models On the MSO70000 Series, the record length of logic channels matches the analog record lengths for uncompromised analog and digital acquisition MultiView Zoom helps you manage long records, compare and analyze multiple waveform segments With high signal-to-noise ratio and low internal noise floor, the DPO/DSA/MSO70000 Series enable you to perform precise characterization measurements. When debugging a DUT, a low noise floor and maximum signal fidelity of the measurement instrument allows you to find the smallest anomalies affecting the DUT’s performance. For RF signals, a lower noise floor translates into a higher dynamic range, opening the DPO/DSA/MSO70000 Series to a wider range of applications Widest Range of Probing Solutions – Whether you need to measure 8 Gb/s serial data, fast digital logic, or switching currents from your new power supply design, Tektronix offers a vast array of probing solutions, including active single-ended, differential, logic, high voltage, current, optical, and a wide range of probe and oscilloscope accessories.

AH118 Compower

BRL Test is your EMC EMI Headquarters. Click for Com-Power AH-118 pricing now.

Com-Power AH-118

Click here for datasheet and quoteform at  Call BRL Test today at 407-682-4228

The Horn antenna Model AH-118 is a standard broadband double ridged waveguide horn antenna. This antenna is linearly polorized and is designed specifi cally for EMC measurements for the 1-18 GHz frequency range. The AH-118 Horn antenna can be used for emissions and immunity testing. The gain of this Horn antenna is at least 6.1 dBi over the entire frequency range. Model AH-118 can accept up to 300 Watts input power in continuous mode. This antenna is constructed using light weight aluminum with a corrosion resistant conductive coating. The mounting base of Model AH-118 has 1/4 inch x 20 threads. This allows the antenna to be mounted on a tripod (Model AT-100) or a tripod with matching threads. Each antenna is individually calibrated at 3 meters. The calibration data and certifi cate will be shipped with each antenna.

This antenna is suitable for ANSI 63.4, CISPR16, EN 55022, FAA and other EMC standards that require emissions and immunity testing. The high gain reduces input power requirements to generate high electromagnetic field levels for immunity testing. High gain also increases antenna sensitivity to low level signals. During emissions measurement, the fi eld strength (dBV/m) is calculated by adding the antenna factor (dB/m) to the voltage measured (dBV) at the antenna terminals. For immunity testing, the input power requirement P in Watts to generate E Electric Field Strength in V/m at a distance in D meters can be calculated by using the following formula: P = E2 x D2 / 30 x Numeric Gain G = 20 log F -29.79- AF G = 10 log (Numeric Gain) Where G= gain in dBi F = Frequency in MHz AF = antenna factor in dB

Frequency Range: 1 GHz – 18 GHz Input Power: 300 Watts continious VSWR: 2.0 : 1 Polorization: Linear Impedance: 50 Ω Connector type: N Female Weight: 4 lb. max. Size: 7.8″ X 9.5″ X 5.6″ max.

BRL Test is your EMC EMI headquarters.  Click here to shop now.

   Absorbing Clamps for EMI EMC
   Antenna Kits
   Antennas for EMC EMI
   CDN Calibration Accrs
   Comb Generators
   Conducted Immunity System CIS
   Directional Couplers (DCD, DCU)
   EMI Test Receivers
   Line Impedance Stblzr
   Transient Limiters for LISN
   Near Field Probes
   Power Amplifiers for EMC EMI
   CDN Coupling Decoupling Networks
   Preamplifiers for EMC EMI
   Telecom (Part68 CS03)
   Antenna Masts
   Turntables for EMC EMI


E4448A at BRL Test. 50 GHz Spectrum Analyzer. Go millimeter. Flexible, easy and fast.

Keysight E4448A

Millimeter wave no problem. Phase noise – bam!  Spur searches and modulation analysis are a snap.  That’s why this a Performance Spectrum Analyzer (the key word being performance.)  Get your PSA and rule now!

BRL Test is committed to real budget solutions to complex problems.  Why pay more?  Purchase premium used and certified equipment warrantied and backed by BRL Test’s World Class Repair Lab.

Click here for E4448A datasheet and quote form.

Call your BRL Test representative now while we have these for less.  866-275-8378

E8364B photo

Keysight E8364B is fast, accurate, quiet, sensative and easy to use. Sale priced at BRL Test for a limited time. Click for data sheet and quote form.

Keysight E8364B
The PNA’s architecture includes high quality, stable hardware and flexible software. The standard PNA is suitable for testing passive and active devices such as filters and ampliiers. Users can easily add options to test mixers, harmonics, intermodulation distortion (IMD), pulsed-RF, antennas and millimeter-wave (mmwave) components.

Purchase easy knowing that you are fully warrantied, certified and backed by BRL Test’s World Class Repair Department. Call your BRL Test representative today at 866-275-8378.   BRL Test – We absolutely know network analyzers.

Click here for E8364B datasheet and quote request form.


J7203A OmniBER On Sale at BRL Test for $5,900.  Repairs and calibrations too.

J7203A OmniBER On Sale at BRL Test for $5,900. Repairs and calibrations too.


Click here for datasheet and quote request forms at BRL

Questions?  call your BRL test representative at 866-275-8378


Motorola R2600D Communications Analyzer On Sale at BRL Test for $5,900 for a Limited Time.

Motorola R2600D Communications Analyzer On Sale at BRL Test for $5,900 for a Limited Time.