Com-Power AH-118
Click here for datasheet and quoteform at BRLTest.com Call BRL Test today at 407-682-4228
The Horn antenna Model AH-118 is a standard broadband double ridged waveguide horn antenna. This antenna is linearly polorized and is designed specifi cally for EMC measurements for the 1-18 GHz frequency range. The AH-118 Horn antenna can be used for emissions and immunity testing. The gain of this Horn antenna is at least 6.1 dBi over the entire frequency range. Model AH-118 can accept up to 300 Watts input power in continuous mode. This antenna is constructed using light weight aluminum with a corrosion resistant conductive coating. The mounting base of Model AH-118 has 1/4 inch x 20 threads. This allows the antenna to be mounted on a tripod (Model AT-100) or a tripod with matching threads. Each antenna is individually calibrated at 3 meters. The calibration data and certifi cate will be shipped with each antenna.
This antenna is suitable for ANSI 63.4, CISPR16, EN 55022, FAA and other EMC standards that require emissions and immunity testing. The high gain reduces input power requirements to generate high electromagnetic field levels for immunity testing. High gain also increases antenna sensitivity to low level signals. During emissions measurement, the fi eld strength (dBV/m) is calculated by adding the antenna factor (dB/m) to the voltage measured (dBV) at the antenna terminals. For immunity testing, the input power requirement P in Watts to generate E Electric Field Strength in V/m at a distance in D meters can be calculated by using the following formula: P = E2 x D2 / 30 x Numeric Gain G = 20 log F -29.79- AF G = 10 log (Numeric Gain) Where G= gain in dBi F = Frequency in MHz AF = antenna factor in dB
Frequency Range: 1 GHz – 18 GHz Input Power: 300 Watts continious VSWR: 2.0 : 1 Polorization: Linear Impedance: 50 Ω Connector type: N Female Weight: 4 lb. max. Size: 7.8″ X 9.5″ X 5.6″ max.
BRL Test is your EMC EMI headquarters. Click here to shop now.
EMC EMI
Absorbing Clamps for EMI EMC
Antenna Kits
Antennas for EMC EMI
CDN Calibration Accrs
Comb Generators
Conducted Immunity System CIS
Directional Couplers (DCD, DCU)
EMI Test Receivers
Line Impedance Stblzr
Transient Limiters for LISN
Near Field Probes
Power Amplifiers for EMC EMI
CDN Coupling Decoupling Networks
Preamplifiers for EMC EMI
Telecom (Part68 CS03)
Antenna Masts
Turntables for EMC EMI